Easy Peasy Tea Party Printed Quiet Book Page

This easy peasy quiet book page comes with a little disclaimer. I used a regular printer and fed some Korean hard felt through it rather than paper. I printed around ten pages worth, and they all printed fine. Not long after doing this however, my printer would no longer print correctly, and I had to get another one. 

It is certainly better if you can use the sublimation printing method to print on felt instead! See my post Sublimation Printing on Felt - Test. The colours would turn out much better too, no doubt. Although I think it is okay anyway, especially for a page like this. My Mum says it makes it look antique.

What little girl doesn't enjoy a tea party? I certainly enjoyed many on a cot blanket (think pretend picnic blanket) with my sister and all our dolls and teddies. This little girl has a puppy and kitty to spoil, and they are all totally adorable.

I found this ‘Little Miss Alice & Her Dolly – a commercial Paper doll book’ vintage paper doll set on Pinterest - and there you can find many others as well. I have saved quite a few that might work well for quiet books to my board Felt Sublimation and Printables, which needs a bit of re-organising. The link to the Marges8's Blog posts where you can find the image is here.

Tahlia demonstrates how to mess up a quiet book for a gift

I simply cut slits where indicated for the puppy and kitten to sit at the table and sewed around the outside edge of the felt section depicting the table, leaving the top open to form a pocket to store the dolly, puppy and kitten.

Finished!

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

Have you made something similar yourself? Let me know how it went. And which background do you like best for the vintage dolly tea-party?

Psalm 29 - Enthroned Above The Flood Quiet Book Page

Psalm 29 reassures us the God is both powerful and in control. He sits enthroned above the flood.

Memory Verse: “The Lord sits enthroned over the flood; the Lord is enthroned as King forever." Psalm 29:10 NIV

Materials needed to create the Enthroned Above The Flood quiet book page:

• A4 felt background sheet - I used blue
• a Noah's ark and animals image - I used this printable from the article Sharing Time: The Prophet Will Tell Us in the LDS kids magazine Friend
• felt in white, green, red and as close as you can get to gold
• Kam snaps
• ric rak
• 30cm of 2mm round elastic
• wooden cloud buttons - I bought these from AliExpress (not an affiliate link)
• dotted mesh material
• 40mm wide rainbow ribbon - I bought this from AliExpress (not an affiliate link)
• gold pleather
• clear craft glue if using pleather to make sewing easier - I used polyacetic acid & ethylene resin based glue
• decorative beads
• a throne template - I modified this Colouring page Saint Nicholas' throne from edupics.com
• hot glue gun and glue

Firstly, get the Noah's Ark and animals transferred onto white felt by the sublimation printing and heat press method - see my post on Sublimation Printing on Felt - Test. Cut out the ark and animals and sew the ark onto the background page along three sides leaving the top open to form a pocket for the animals.

Prepare two wooden cloud buttons by threading 15cm of the elastic onto each and tying a knot to create a loop of elastic. Slide the knot to the back of the button and hot glue in place. Cut the ends short.

Cut your mesh material to size to fit inside your page with extra length (and width if you want to finish the edges first - I didn't but I wish I had). Fold the top over itself a couple of times and pin and sew along the top edge as shown above, placing the elastic of the buttons underneath at either end. Make sure the end is poking out the bottom so you can pull it up and over the buttons to hold the rolled up mesh in place later.

Measure your ground and make a few layers of grass for the animals to sit in. I used ric rak to edge the top of the grass as there would be too many layers of felt along the bottom if I doubled the felt as I usually do. Use kam snaps to attach the grass to the page. At the back, use small squares of spare felt to strengthen them and prevent them ripping a hole when being pulled.

Cut a length of rainbow ribbon to fit your page and melt the edges - see my post on How to Stop Ribbons Fraying. I rounded the edges, but you don't have to. Mark where the button holes should be on the ribbon, then sew and cut.

Use the a colouring page as a throne template to make your throne. Simplify the lines by joining some together and rounding off the top.

Before sewing the pleather, I used the glue to attach the pleather to a sheet of felt. My pleather was stretchy which makes it very difficult to sew. Allow the glue to dry before sewing in place. Then sew the red felt on top and cut out the front section of the throne. Decorate with beads at the top.

Make a slot for threading the throne onto the rainbow ribbon by doubling a piece of felt and sewing onto the other half of your sheet of felt. Make sure it is slightly wider than your rainbow ribbon to allow it to pass through easily. Hot glue the throne to the sheet of felt with the slot facing out and centered at the back. Cut out the throne once again.

Thread the throne onto the ribbon and button it on, or store in the ark pocket.

Complete!

Difficulty Level = Intermediate.

Pleather can be difficult to work with.

Key Learning Areas and Skills

• Psalm 29 - God is in control even when it might seem like He is not
• Rolling - roll up the rain, and roll it down again
• Buttoning - secure the rain when it is rolled up with the elastic and cloud buttons, button on the rainbow ribbon
• Threading - thread the throne onto the rainbow ribbon
• Colours - learn the colours of the rainbow
• Tucking - tuck the animals into the ark
• Using snaps - snap on and off the ground to make it appear to flood
• Fine Motor Skills - all quiet books encourage fine motor skill development
• Hand-eye Co-ordination - all quiet books encourage hand-eye co-ordination

Read the Chapter

Psalm 29.

Devotional

Maybe you feel like everything is out of control, but God assures us that He's got it. Sometimes trouble is what we need to wake us up and turn our course. When trial comes are we willing to listen to instructions and build an ark? Or do we insist on our own way?

This Psalm speaks about God twisting the oaks and breaking the cedars. Trees are often used as a symbol of men and strength. So the strength of men is nothing to God. Therefore, why worry about what man can do to you? Rather worry about pleasing God.

Not only does God rule over the kaos of The Flood, but He caused it.

Psalm 29 - HeartSong

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

Have you made a Noah's Ark quiet book page? I'd love to hear about it in the comments!

Genesis 39 - The Temptation of Joseph Quiet Book Page

Genesis 39 demonstrates Joseph's integrity.

Memory Verse: "No one is greater in this house than I am. My master has withheld nothing from me except you, because you are his wife. How then could I do such a wicked thing and sin against God?” Genesis 39:9

Materials needed to create The Temptation of Joseph quiet book page:

• A4 felt background sheet - I used black
• sublimation printed Ancient Egypt dress-up dolls by Gabi's Paper Dolls (I only printed some of the female costumes and the dolls) - you can read how I had it done on my Sublimation Printing on Felt - Test post
• Veltex material (also called loop fabric or industrial webbing) in skin colour
• Velcro dot
• hot glue gun and glue
• Double sided iron-on interfacing scrap
• gold coloured material that won't fray - I used pleather but it was difficult to sew due to it's stretchiness (made easier by gluing first)
• clear craft glue if using pleather to make sewing easier - I used polyacetic acid & ethylene resin based glue
• decorative material
• two decorative buttons
• jump ring tassel
• gold ribbon
• gold elastic
• felt in gold/straw colour
• sewing thread to match
• my free template (Egyptian wardrobe only)

First cut out your paper dolls, clothes and wigs, cutting off the tabs as you go. Then use your male paper doll to cut out a section of Veltex and double sided iron-on interfacing to the same shape as his torso/legs.

This one is Tahlia's favourite dress

Arrange your pieces onto the background and iron on the Veltex to the background in the correct position using the interfacing. Sew around the edge to hold in place.

Potiphar's wife acting like a 'cougar'... - this one is my Grandma's fav dress

Hot glue the feet of the male doll to the background in place over the Veltex. Cut out his undergarment and finish gluing down his legs. Hot glue the Velcro dot to the back of his undergarment and place in position. Then line up the head and glue the remainder of his body down. Hot glue the woman into position.

To make the wardrobe, trace the pieces using the template onto the back of your pleather using pen - this will avoid puncturing the pleather unnecessarily. Cut them out. For the decorative panel, cut the size to the back piece and then trim down slightly so it doesn't show on the edge of the wardrobe when layered. Using the clear craft glue, glue the decorative panel to the gold/straw felt and allow it to dry. Then glue the gold edging on top and allow to dry. Sew the inner section around the decorative panel.

Glue two sections of gold ribbon on the back to form hinges for the front door of the wardrobe. Then glue some pleather to the back of your felt and allow to dry. Sew around the outside edge of your wardrobe door and then cut it out, making sure not to cut off the hinges.

I found I had to shorten the bottom of the wardrobe base by around 5 mm and overlap the door over the lower section of the wardrobe front slightly to fit it on my page. I didn't change the pattern as you may be using a different size page to me.

Glue the pleather wardrobe base to the background page and insert the hinges from the door underneath on one side and insert a short loop of gold elastic with a jump ring tassel threaded onto it on the other side where you want the latch to be. Allow to dry and sew in place, reinforcing the stitching over the hinges and elastic loop.

Glue the remaining pleather pieces to the gold/straw felt and sew along the top edge of the draw and lower section of wardrobe front. Cut the draw out and sew the lower edge in place over the lower section of the wardrobe front. Then sew the lower section of the wardrobe front down over the base on the bottom and sides to form a pocket. To complete the wardrobe, hand sew your buttons on.

Finished!

Difficulty Level = Hard

It will be easier if you use something other than pleather that stretches! If you use pleather, be sure to use the glue.

"Hey Joseph, want to see my secret garden?"

Key Learning Areas and Skills

• Genesis 38 - This page teaches about how we need to be prepared to suffer even when we do the right thing.
• Buttoning - Open and close the wardrobe
• Tucking - Tuck the wigs into the wardrobe draw
• Imaginative Play - dress up Potiphar's wife in all her outfits
• Velcro - rip off Joseph's undergarment (and re-position them)
• Fine Motor Skills - all quiet books encourage fine motor skill development
• Hand-eye Co-ordination - all quiet books encourage hand-eye co-ordination

Read the Chapter

Genesis 39

Devotional

I admire the way that Jacob brought up Joseph. He was only around 17 when he was sold as a salve and yet His devotion to God is to be greatly admired. It must have been difficult to follow God in the situation he found himself in, and it would have been easy to go along with new cultures and customs and tell himself that God had forgotten him, so he may as well do likewise.

"Hey Joseph, do you want some 'trifle'..."

There are a few boundaries Joseph put in place to reduce the chances of finding himself in less than ideal circumstances. You can read about Joseph's 5 Steps to Avoid Temptation: Genesis 39:6-23 on the God Running blog. He had resolved to keep himself from "strange" women (those who did not follow God) as told in the story of Joseph and Asenath, translated by H. F. D. Sparks. He must have envisaged a celibate life, exiled in the land of Egypt. And not only exiled, but imprisoned. Nevertheless, as stated at the end of the blog post mentioned above, God preserved his life in that the punishment due Joseph was death. I noticed that Joseph was sold to Potiphar the Captain of the Guard (Genesis 37:36) - and the same titled person is in charge of the prison. It looks like Potiphar realises that Joseph is innocent because instead of putting Joseph to death, he saves face by putting him in his prison, but eventually puts him in charge of it just as he had done with his household (Genesis 40:3-4). Despite his circumstances, Joseph sticks to his values and God rewards him with freedom, power, and a beautiful convert, Asenath.

There are so many parallels between the story of Joseph and Jesus in the Bible, and I can only see more told through the love story of Joseph and Asenath.

Dreamcoat Part 8 - Potipher

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

Hearing from you gives me great encouragement!

Pre-School Bible Class Song Activity - Felt Bible

The best Bible class I have taken Tahlia to when she was little was based almost entirely on songs and activities to go with the songs. It had a theme or story for each month and a box of items to go with each song. Children need repetition, and repeating the songs all month helped them learn the song and enjoy it.

This felt Bible has been hanging around the children's room at a church I recently visited for at least 20 years. No-one, not even the older ladies, could tell me where they came from - but they would be easy enough to make yourself. I think they may have been a kit purchase for people to cut out and put together themselves. If you know the company that produced them, please share your info!

They appear to be printed using the sublimation method to me, although the ink has rubbed off onto the other pages so perhaps not. But sublimation printing would definitely work if you did not want to paint/draw/sew a whole bunch by hand. Check out my post on affordable sublimation printing - Sublimation Printing on Felt - Test.

Alternatively you could use iron-on transfer paper and use images of your child's family. Putting Jesus there with all the other family members demonstrates to a child that He is an important member of their family.

This item was handed out to accompany the song Read your Bible, Pray Every Day. I'm sure you could adapt it to many other songs too, such as With Jesus in the Family, Happy Happy Home.

Children's Bible Songs has printable lyrics and guitar chords for Read Your Bible, Pray Every Day.

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

If you have any other song activities or picture ideas to include in this Bible I'd love to hear from you!

Sublimation Printing on Felt - Test

I have spent a lot of time researching the best AND most affordable way to print on felt.

Background:

I wanted a method of actually printing on felt, rather than using t-shirt transfer paper which leaves a plastic film on top of the felt. This plastic layer prevents felt from sticking to itself and makes layering difficult. Layering is very useful for felt board story play sets and quiet books, such as dress up dolls and the like.

Sublimation printing transfers the ink directly into the felt fibers, and because it uses pigment based ink instead of dye based ink (which is water soluble) it tends to last well even after washing. A sublimation printer prints the pigment ink onto sublimation paper. After it has dried, the paper is layered on top of the felt and pressed in a heat press. This heats the ink so fast that it quickly turns to a gas and transfers from the paper onto the item - in my case felt.

After I came to the conclusion that sublimation printing was most likely the best way to go, I set about finding a way to make it affordable.

There are a couple of companies that offer such services online, such as Bags of Love or Contrado in the UK. It is rather expensive, particularly if you do not live in the UK!

I considered buying my own sublimation printer and heat press - which would have been more affordable than buying from overseas. I joined as many sublimation printing groups on Facebook as I could to find out what were the good brands and such. Most importantly, I wanted to check that sublimation printing on felt does actually work before I made an investment in a printing system.

I quickly discovered that an affordable machine does not come with the most vibrant inks. And the ink can dry up and clog the printer if you don't use it regularly. Since my use would only be as a hobby, I decided it would be better to let the professionals deal with those issues.

In a couple of the local sublimation printing groups I asked if someone might be willing to do a test for me. Thankfully Leonie from Digitextiles offered to test some felt samples for me at no cost!

Digitextiles Test Sample Results:

Club House felt roll (Spotlight) - was SUCCESSFUL and improved the fiber quality (I was worried that it was not good enough but the heat press tightened the structure of the fibers)

Acrylic felt packaged roll (Spotlight) - was SUCCESSFUL

Arbee 50 pack A4 felt sheets (Spotlight) - was SUCCESSFUL

Acrylic felt by the meter (Spotlight) - was SUCCESSFUL

Arbee stiffened felt sheets (Spotlight) - was SUCCESSFUL but became a lot thinner than it was originally, although it remained stiff

Sullivan's A4 felt sheets (Lincraft) - was SUCCESSFUL and remained around the same thickness and quality

All felt was heat pressed for 45 seconds at 190 degrees Celsius with no preshrinking.

Screen printed fabric on heat press to sure
 ink in studio by Scrud123

• CC-BY-SA-3.0

My Felt Printing Plan:

In an effort to make printing on felt affordable, I asked Leonie if she would be willing to print and post me sublimation paper only. That way I would only have to buy a heat press and I would also be saving bulky postage and providing the materials and manpower myself. Transferring individual parts of an image to stiffened felt can be done as required and would not be causing too much mucking around for a sublimation printing business (which would also put costs up).

She has agreed! Printing costs are around $20 per 1 x 1.48m area plus postage. This area fits around 21-25 A4 sheets of images. She prefers images are sent via email or drop box. They should also be sent as individual images rather than as a 21 page PDF (which suits me perfectly).

If you are interested in using this method, here is a great buying guide by STAHLS' for what to look for in a heat press.

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

If you have any suggestions of what I could make using sublimation printing I'd love to hear from you!